As an Amazon Associate I earn from qualifying purchases.
MeetRade #ad - The adhesive is easily removable and never leave a residue. Br>high temperature resistance, so can install the camera out side the house. 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used.
Peel the protector film off, then apply on. 5. Press it at least 30 second. 6. Don’t use it in 12 hours. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
Clean the surface of the suction cup by alcohol. 2. Peel the adhesive pad and apply to the suction cup carefully, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install. 4. Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
WixGear #ad - Guaranteed stronger stickiness after 24 hours. This 3m adhesive strips double sided can be used even in Texas heat because it is twice stronger than any adhesive. Compatible to most stick on mounts: this car adhesive 3m adhesive pad is an automotive adhesive that is compatible with most of the dashboard mounts in the market.
This adhesive stickers come with dry wipes to remove excess dirt from surface before application.
Use in any flat surface: this 3m adhesive backing is made with 3m vhb adhesive pads that can be used as windshield mount adhesive, in your car dashboard, or even any flat surface at home. Easy peel and stick: this adhesive pads 3m double sided adhesive can be removed easily without leaving any adhesive residue.
AZXYI #ad - Try azxyi super suction cup adhesive replacement for lock sucker. Easy to useto maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. First peel off the white side of the adhesive and stick it to the car mount base. Very high bondthese high-strength, mirrors, bedroom, like car dashboard, glasses, office, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, kitchen, nightstand and more.
After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. 6pcs adhesives replacement for suction cup mount azxyi offers 6 pcs round sticky adhesive padsdiameter: 53mm, 2. 09", phone mount, which can help to fix your Garmin GPS mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Never fall again! And wait at least 24 hours to use after stuck.
volport #ad - Easy to fix your navigator bracket, heavy duty dashboard mount base, you can use it without worry in hot summer, you can stable and secure driving truck, vehicle in bumpy roads. Package includes2 x 2. 76 inch 70 mm diameter double face heat resistance round dashboard pad mounting disk, 1 x user manual. Genuine 3m sticky self-adhesive dots these phone dashboard car mount back stickers have high temperature120℃+ resistance performance, car phone base, even in Texas.
Best car cellphones mount adhesive attachment replacement. Universal compatibilityself sticky gel mounting disc 70mm fits any suction cup style accessories, to solve the problem of suckers falling off.
Easy to remove these circle high heat double sided suction cup sticker backing mounting disk is easy to remove, you can remove it without leaving adhesive residue, will not damage the dashboard surface, no tool required. Important tips: these adhesive pads only compatible with holder cup around 70mm and must wait at least 24 hours before use to increase adhesion. Make sure the surface of the chosen area and the suction cup of the gps/telephone/magnetic/rear view camera holder is cleaned completely before applying a new adhesive.
volport #ad - 3. Package includes : 4 x 3. 15 inch wide 80mm diameter3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape, 4 x alcohol pad, 1 x user guide. Designed for suction cup mount volport 3m round flat adhesive stickers fit for dashboard suction cup mount cradle, hook, soap dispenser, backup camera screen, iPad, bathroom shower caddy / head /shelf /rod/, make your sucker stronger.
It is also compatible with dash cam, rv, towel rack/ring, hanging hooks, GPS, car cell phone mount, suction adhesive base/car clips, dashboard pad mounting disk, tablet holder, ect. You can also cut or trim the two sides sticky tabs to any smaller size you need.
This 3m double face strength sticky part big adhesive backing dot is also waterproof. Easy to use : this large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.1.
AZXYI #ad - Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Compatible with most suction cup dashboard mount and other windshield long arm mount, EZ Pass/I-Pass/SunPass holder, GPS holder, Wall holder, Dashboard Toys, camera mount, ETC, dash camera mount holder etc on the market.
These adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. First peel off the white side of the adhesive and stick it to the car mount base. You can also attach mounting disk to car dash with these dashboard adhesives to get a smooth surface for your suction cup dashboard phone mount.
Compatible with suction cup itemsyou can cut these windshield adhesives into smaller pieces if need. Suitable for car phone mount holder bracket, Windshield, GPS, wireless charger base, Camera, Tiles, Wall Pictures and more.6pcs adhesives replacementwe offer 6pcs 80mm 3. 15" circle double-sided extra strong Adhesive Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
Great 1 #ad - Features smooth edges that won't scrape your hands and are designed for one hand mounting and strong magnetic hold. Paper thin plates, that leave no detectable bulk to the phone or phone case.
Installs and removes in a snap and will not leave any sticky residue on your phone or phone's case. 12-pack set includes 6 rectangular and 6 Round Plates giving you enough options to use with bigger or smaller devices.
PKYAA #ad - Second, they need time to cure. Tips and tricksthese adhesives perform flawlessly when being applied with steady pressure on a clean surface. Size: the length is 1. 97", the width is 1. 18", and the thickness is 003". Ensure that the car mount has a clean surface to adhere to so that it sticks properly.
Easy to usefirst peel off the white side of the adhesive and stick the adhesive to the car phone mount base. Please clean the adhesion surface when applying adhesive pads. Rounded bulge is designed for more easily gripping the liner edge for removal. They will cure about 50% in 20 minutes - but need 2 days to be 100%.
After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car phone mount to your car dashboard. Automotive grade adhesivePKYAA automotive mounting industrial grade adhesive successfully bonds car dashboard for permanent and repositionable applications. That means no wax, dirt or porous surfaces and applying steady pressure for a period of time - not just stuck on for 3 seconds.
pop-tech #ad - It also resists heat and moisture, dashboards phone socket. Applicable dash suction cup phone mount, outdoor camera car mount, wireless charger base, backup camera, alarm sensors, gps navigation bracket, and car decorations, electronics, action camera, car tablet stand, assortment, monitor, radar detector mount, toy, monitor. Extra strong both side round 3m vhb dashboard cell phone grip replacement adhesion pads's stickiness is 40% stronger than ordinary 2 side sticky glue, shower head, car phone base, Let your hands free! Easy to fix your Navigator bracket, vehicle in bumpy roads.
Stable and secure driving truck, use it without worry in hot summer. Package includes & 100% satisfactory service 4 x 2. 76 inch 70 mm diameter double face heat resistance round mounting disk adhesives utensil, 4 x alcohol pads.
We provide 12-month warranty, replacement and lifetime technical support for best after-sale service. Easily replaceable suction cup replacement customized adhesive circle for dash cute/button/decor/custom/controls/cam recording, easy replac, bonding almost instantly with no drying time. Genuine 3m sticky adhesive dotsthese phone dashboard car mount plate back stickers have high temperature120℃+ resistance performance, heavy duty dashboard mount base. Super sticky & easy to removethese high-strength, very high bond double-sided vinyl stickers let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, peel off without leaving any sticky residue behind.
SALEX #ad - Sticky phone metal discs for case | stick car mount metal magnet sticker to phone case, battery cover. Circular iphone metal plates are not magnets - work ONLY with magnetic car mount, air vent phone holder and houshold magnets for crafts - there is no magnetism inside the phone case adhesive flat circles.
Universal phone magnet metal plates with clear mirror silver color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone. Strong adhesive thin metal plates | phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing. If the strength of magnetism is not enough - use 2 metal plates together to make a double steel sheet. Self adhesive metal discs compatible with all types of magnetic mounts.
1. MeetRade
#adFor xiaomi xiaoyi gopro Camera and GPS Sat Nav Cam 70mm, 8PACK MeetRade Stick On Double Sided Heavy Duty Adhesive Pad Disk for Lock Sucker Suction Cup Hook Mounting on Dashboard
#adPeel the protector film off, then apply on. 5. Press it at least 30 second. 6. Don’t use it in 12 hours. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
More information #ad
Even in a car, it also waterproof, just peel it from the side and slowly pull it up. Clean the surface of the suction cup by alcohol. 2. Peel the adhesive pad and apply to the suction cup carefully, remember you finger don’t touch the adhesive pad. 3. Clean the surface you need to install. 4. Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly.
| Brand | MeetRade #ad |
| Manufacturer | MEETRADE #ad |
| Weight | 0.1 Pounds |
More information #ad
2. WixGear
#adWixGear 3M 6 Pack Sticky Adhesive Pads Replacement Mounting Tape, 6 3M with 2 Dry Wipes for Magnetic Car Mounts, Dashboard Sticker Pads for Magnetic Phone Car Mount, Double Sided 3M Adhesive Pads
#adThis adhesive stickers come with dry wipes to remove excess dirt from surface before application.
More information #ad
With this mounting tape, you can re-use your old cell phone car mount. Heat resistant: this 3m sticky pads can withstand up to 120℃ heat in summer. Stronger adhesive: this double sided tape are 3m adhesive strips that can replace most rectangular shaped stick on dash car mounts. Use in any flat surface: this 3m adhesive backing is made with 3m vhb adhesive pads that can be used as windshield mount adhesive, in your car dashboard, or even any flat surface at home. Easy peel and stick: this adhesive pads 3m double sided adhesive can be removed easily without leaving any adhesive residue.
| Brand | WixGear #ad |
| Manufacturer | WizGear #ad |
| Part Number | Magnetic Phone Mount 112 |
| Model | Magnetic stick on -mount |
More information #ad
3. AZXYI
#adAZXYI Windshield Mount Adhesive Replacement Kit, Compatible with Mounting Disk, 6 Pack 53mm2.09inch Adhesives for Suction Cup Replacement, GPS Dash Cam and Socket Car Dashboard Suction Cup Mount
#adAfter applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
More information #ad
Work as wireless charger mountthe strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage. Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. 6pcs adhesives replacement for suction cup mount azxyi offers 6 pcs round sticky adhesive padsdiameter: 53mm, 2. 09", phone mount, which can help to fix your Garmin GPS mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Never fall again! And wait at least 24 hours to use after stuck.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 4.13 Inches |
| Length | 5.91 Inches |
| Weight | 0.04 Pounds |
| Width | 0.39 Inches |
| Part Number | AZXYI-6MRT |
| Model | AZXYI-6MRT |
More information #ad
4. volport
#adVery Strong Sticky Adhesive, Double Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount 2 Pack, 2.76in/70mm VOLPORT Dashboard Pad Mounting Disk Adhesive Replacement Kit
#adBest car cellphones mount adhesive attachment replacement. Universal compatibilityself sticky gel mounting disc 70mm fits any suction cup style accessories, to solve the problem of suckers falling off.
More information #ad
We provide a one-year warranty and if you need any help with our product, 4 x alcohol pads, please do not hesitate to contact us and we will provide you our best after-sale service. All we want is your satisfaction. Extra strong both side round 3m vhB dashboard cell phone grip replacement adhesion pads' stickiness is 40% stronger than ordinary 2 side sticky glue. Easy to remove these circle high heat double sided suction cup sticker backing mounting disk is easy to remove, you can remove it without leaving adhesive residue, will not damage the dashboard surface, no tool required. Important tips: these adhesive pads only compatible with holder cup around 70mm and must wait at least 24 hours before use to increase adhesion. Make sure the surface of the chosen area and the suction cup of the gps/telephone/magnetic/rear view camera holder is cleaned completely before applying a new adhesive.
| Brand | volport #ad |
| Manufacturer | volport #ad |
| Height | 0.39 Inches |
| Length | 7.08 Inches |
| Width | 3.54 Inches |
| Part Number | V-C1AC-N |
More information #ad
5. volport
#ad80mm 3.15" VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders, Sticky Adhesive Replacement for Dashboard Suction Cup Mount
#adIt is also compatible with dash cam, rv, towel rack/ring, hanging hooks, GPS, car cell phone mount, suction adhesive base/car clips, dashboard pad mounting disk, tablet holder, ect. You can also cut or trim the two sides sticky tabs to any smaller size you need.
More information #ad
2. We provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service. Very high bond stickiness : the adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3m double face strength sticky part big adhesive backing dot is also waterproof. Easy to use : this large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.1.
| Brand | volport #ad |
| Manufacturer | volport #ad |
| Height | 0.39 Inches |
| Length | 3.94 Inches |
| Width | 3.54 Inches |
| Part Number | JJJ-GGG-DE-0808-A-139 |
More information #ad
6. AZXYI
#adGPS, 80mm 3.15 inches Circle Double-Sided Sticker Pads for Dashboard Mounting Disk and Windshield Camera, Car Phone Mount, 6 PCS Windshield Mount Adhesives for Suction Cup Mount
#adThese adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. First peel off the white side of the adhesive and stick it to the car mount base. You can also attach mounting disk to car dash with these dashboard adhesives to get a smooth surface for your suction cup dashboard phone mount.
More information #ad
It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. And wait at least 24 hours to use after stuck. Please wait 24 HOURS to use. Compatible with suction cup itemsyou can cut these windshield adhesives into smaller pieces if need. Suitable for car phone mount holder bracket, Windshield, GPS, wireless charger base, Camera, Tiles, Wall Pictures and more.6pcs adhesives replacementwe offer 6pcs 80mm 3. 15" circle double-sided extra strong Adhesive Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
| Brand | AZXYI #ad |
| Manufacturer | OULISHEN_Made #ad |
| Height | 0.04 Inches |
| Length | 3.15 Inches |
| Width | 3.15 Inches |
| Part Number | OULISHEN-OU6GDR |
| Model | OULISHEN-OU6GDR |
More information #ad
7. Great 1
#adTablet Holder, Cradle-Less, Black Not a Magnet, Universal Metal Plates with 3M Adhesive for All Magnetic Car Mounts, Cell Phone, Air Vent Mount, 6 Round, 6 Rectangular
#adInstalls and removes in a snap and will not leave any sticky residue on your phone or phone's case. 12-pack set includes 6 rectangular and 6 Round Plates giving you enough options to use with bigger or smaller devices.
More information #ad
Engineered with 3m adhesive for long lasting and stable hold, these plates set your phone on the car mount easier and securer so you can go hands-free even on the bumpiest of roads. Perfect replacement for magnetic car mount kits.| Brand | Great 1 #ad |
| Manufacturer | Great 1 #ad |
| Height | 0.28 Inches |
| Length | 2.68 Inches |
| Width | 2.28 Inches |
| Part Number | 5864135787 |
| Model | iPhone Android Samsung Motorola OnePlus |
More information #ad
8. PKYAA
#adCar Mount Adhesive, Car Mount Sticker Tapes, PKYAA Mounting Adhesive Pads for Dashboard Magnetic Phone Holder, Double Sided Adhesive Pads, 6 Pack Sticky Adhesive Pads for Dashboard Car Mount
#adEasy to usefirst peel off the white side of the adhesive and stick the adhesive to the car phone mount base. Please clean the adhesion surface when applying adhesive pads. Rounded bulge is designed for more easily gripping the liner edge for removal. They will cure about 50% in 20 minutes - but need 2 days to be 100%.
More information #ad
6 pcs adhesive pads for dashboard magnetic mountperfect size for 95% stick-on dashboard magnetic phone car mount with rounded rectangle base on the market. Usabilitywe offer both permanent and removable adhesives that provide a secure bond to the car dashboard after several hours or days yet are initially removable for example to recover wrong positioning and allow the car mount to be removed without leaving adhesive residue or damaging the surface. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car phone mount to your car dashboard. Automotive grade adhesivePKYAA automotive mounting industrial grade adhesive successfully bonds car dashboard for permanent and repositionable applications. That means no wax, dirt or porous surfaces and applying steady pressure for a period of time - not just stuck on for 3 seconds.
| Brand | PKYAA #ad |
| Manufacturer | PKYAA #ad |
| Height | 2.76 Inches |
| Length | 3.94 Inches |
| Weight | 0.02 Pounds |
| Width | 0.39 Inches |
| Part Number | PKYAA-6CP |
| Model | PKYAA-6CP |
More information #ad
9. pop-tech
#ad4 Pack Circle 70mm 2.76" Heat Resistance 3M VHB Double Sided Self Sticker Pads for Universal Dashboard Car Phone Sucker Holder/Dash Cam/Camera/GPS, Sticky Adhesive Replacement for Suction Cup Mount
#adStable and secure driving truck, use it without worry in hot summer. Package includes & 100% satisfactory service 4 x 2. 76 inch 70 mm diameter double face heat resistance round mounting disk adhesives utensil, 4 x alcohol pads.
More information #ad
The size is not too small or too big, etc, compatible with most suction cup cars dashboard mount/accessory & other windshield long arm mount, idol, EZ Pass/I-Pass/SunPass holder, silicone grips, home security wifi camera, cameras wall mount, video camera mount, wireless charger base, dash cam mount holder, statue, panel decorative, GPS holder, etc on the market. We provide 12-month warranty, replacement and lifetime technical support for best after-sale service. Easily replaceable suction cup replacement customized adhesive circle for dash cute/button/decor/custom/controls/cam recording, easy replac, bonding almost instantly with no drying time. Genuine 3m sticky adhesive dotsthese phone dashboard car mount plate back stickers have high temperature120℃+ resistance performance, heavy duty dashboard mount base. Super sticky & easy to removethese high-strength, very high bond double-sided vinyl stickers let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, peel off without leaving any sticky residue behind.
| Brand | pop-tech #ad |
| Manufacturer | pop-tech #ad |
| Height | 0.04 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
More information #ad
10. SALEX
#adWall, SALEX Phone Metal Plates for Magnetic Car Mount, Phone Holder. Replacement Set of 16 Silver Round Iron Discs Without Holes. 3M Adhesive Thin Steel Cell Phone Case Back Magnet Stickers 16 Pack.
#adUniversal phone magnet metal plates with clear mirror silver color match iPhone, iPad, Samsung Galaxy Note and other smartphones or tablets. This method will increase the thickness of the metal, which will increase the suction force of the magnet.
More information #ad
Large cell phone case metal discs for magnet mount is 002" = 005 cm thickness, 1. 7" = 4 cm diameter. Replacement silver metal plates 16 pack set is perfectly matched with phone back case. The surface of the cute round metal sticker for magnetic phone holder with no sharp edges would not damage your fingers and mobile phone. Strong adhesive thin metal plates | phone magnetic mount metal plates stick on your phone case back firmly and securely with 3m adhesive backing. If the strength of magnetism is not enough - use 2 metal plates together to make a double steel sheet. Self adhesive metal discs compatible with all types of magnetic mounts.
| Brand | SALEX #ad |
| Manufacturer | SALEX #ad |
| Height | 0.02 Inches |
| Length | 1.57 Inches |
| Weight | 0.01 Pounds |
| Width | 1.57 Inches |
More information #ad
