Asiawill RDM6300 125Khz EM4100 RFID Reader Module UART Output Access Control System for Arduino

#ad
#ad
Asiawill LYSB00KBN01VY-CMPTRACCS #ad - For Arduino. Specification: module Type: RFID Board Size 3. 8 x 1. 8 x 1. 2cm operation level: digital 5v power supply: external 5v Overview: 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card. Features: support external antenna maximum effective distance up to 50mm Less than 100ms decoding time Uart interface Support EM4100 compatible read only or read/write tags Small outline design Asiawill®.

Rfid reader Module. Access Control System. Uart output. It can be applied in office/home security, anti-forgery, access control, personal identification, interactive toy and production control systems etc.

More information about Asiawill LYSB00KBN01VY-CMPTRACCS #ad

KNACRO RDM6300 125Khz EM4100 RFID Reader Module UART Output Access Control System for Arduino

#ad
#ad
KNACRO #ad - Baud rate: 9600bps TTL RS232 format. Module size:38. 5mm x 19mm x 9mm. Working temperature: -10℃ to +70℃. Receiving range:20-50mm It depends on the antenna, card and the surroundings. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.

Support external antenna. Maximum effective distance up to 50mm. Less than 100ms decoding time. Uart interface. Support em4100 compatible read only or read/write tags. Small outline design. 125khz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card. Supported card: em/tk 4100, em/tk4102, EM4200 or compatible.

KNACRO RDM6300 125Khz EM4100 RFID Reader Module UART Output Access Control System for Arduino #ad - Wiring size:46mm x 32mm x 3mm. Relative humidity: 0-95%. Frequency: 125kHz. Storage temperature:-20℃ to +80℃. Working voltage: DC 5V 5%.

More information about KNACRO #ad


Similar products



Grove - 125KHz RFID Reader

#ad
#ad
Seeedstudio FSM-55 #ad - 4pins electronic brick interface high sensitivity 125khz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card. Features selectable output format: Uart or Wiegand. 125khz rfid cardRead Only. Description the grove-125khz rfid reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand.

It can be applied in office/home security, anti-forgery, access control, personal identification, interactive toy and production control systems etc. Support external antenna. Maximum effective distance up to 50mm. Less than 100ms decoding time. Uart interface. Support em4100 compatible read only or read/write tags.

Grove - 125KHz RFID Reader #ad - Small outline design. 7cm sensing distance. It has a sensitivity with maximum 7cm sensing distance. Arduino Library.

More information about Seeedstudio FSM-55 #ad


Similar products



Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi - HiLetgo RFID Kit

#ad
#ad
HiLetgo® NA #ad - Communication between it and the host SPI mode helps to reduce the connection, reduce PCB board size and cost. 3. Mfrc522 is a highly integrated read and write chip which is applicable to 13. 56mhz contactless communications. In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products.

Support 14443A compatible transponder signals. The digital part handles ISO14443A framing and error detection. It is a non-contact read and writer card chip, low cost and small size, low voltage, is a better choice for smart meters and portable handheld devices development. Mf rc522 completely integrated in all types of 13.

Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi - HiLetgo RFID Kit #ad - 56mhz passive contactless communication methods and protocols. 6. 2. 5. 4. Mfrc522 support mifare series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. As a highly integrated 13. 56mhz card reader new family of chips, mf rc500 and MF RC530, there are many similarities between MF RC522, but also have many differences.

Electrical parameters: Operating current :13-26mA/DC 3.

More information about HiLetgo® NA #ad


Similar products



RF IC Card Sensor Module and S50 Blank Card and Key Ring for Arduino Raspberry Pi - Gowoops RFID Kit

#ad
#ad
Gowoops #ad - 125khz rfid cardRead Only. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance. It can be applied in office/home security, anti-forgery, access control, personal identification, interactive toy and production control systems etc.

RF IC Card Sensor Module and S50 Blank Card and Key Ring for Arduino Raspberry Pi - Gowoops RFID Kit #ad - Support external antenna. Maximum effective distance up to 50mm. Less than 100ms decoding time. Uart interface. Support em4100 compatible read only or read/write tags. Small outline design. 7cm sensing distance. 125khz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card.

Arduino Library.

More information about Gowoops #ad


Similar products



YARONGTECH Proximity RFID Card 125KHZ EM4100 Read Only ID Smart Door Entry Access Control Plastic Card pack of 10

#ad
#ad
YARONG 4331029423 #ad - The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds.

The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance. Rfid card. 4. Pvc material. 2. 125khz. Arduino Library. 125khz rfid cardRead Only. It can be applied in office/home security, access control, anti-forgery, personal identification, interactive toy and production control systems etc.

YARONGTECH Proximity RFID Card 125KHZ EM4100 Read Only ID Smart Door Entry Access Control Plastic Card pack of 10 #ad - Support external antenna. Maximum effective distance up to 50mm. Less than 100ms decoding time. Uart interface.

More information about YARONG 4331029423 #ad


Similar products



AMEXCOS Proximity EM4100 125KHz RFID Card Tag Token Key Chain Keyfob Reader, Keypad Card for Door Entry Access Control System, for Security Lock Pack Of 5

#ad
#ad
AMEXCOS IDKeyfob-5 #ad - Arduino Library. Each token pre-programmed with unique ID which is printed on it. This rfid card is read only and not rewritable. Water resistant, each comes with Key ring included. For rfid proximity access control system, video door phone electric lock Unlock. It is widely used for access control system to implement the pre-set function such as Unlock, door open, password management.

The key fobs are made with abs material, which is waterproof and durable. Card read distance: 0-10cm. Package included: 5 x 125khz rfid keyfob 125khz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card. 125khz rfid cardRead Only. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip.

AMEXCOS Proximity EM4100 125KHz RFID Card Tag Token Key Chain Keyfob Reader, Keypad Card for Door Entry Access Control System, for Security Lock Pack Of 5 #ad - Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The module use a voltage of 3. 3v, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.

Rfid card.

More information about AMEXCOS IDKeyfob-5 #ad


Similar products



ARDUINO UNO R3 A000066

#ad
#ad
ARDUINO A000066 #ad - 125khz rfid cardRead Only. Arduino Library. It has 14 digital input/output pins of which 6 can be used as PWM outputs, 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.

Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. All key fobs come attached with a metal key ring. Compatible with standard em ID access devices or ID readers, Card read distance: 0-10cm. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.

ARDUINO UNO R3 A000066 #ad - 125khz rfid em4100 key tag read only and not rewritable, Easy to carry, Water resistant. Each key fob is pre-programmed with a unique digit ID numbers. For rfid proximity access control system, video door phone electric lock Unlock. It is widely used for access control system to implement the pre-set function such as Unlock, door open, password management.

The key fobs are made with abs material, which is waterproof and durable. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip.

More information about ARDUINO A000066 #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
#ad
Elegoo EL-CP-004 #ad - We have the manufacture factory, making productions and selling by ourselves. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires 125khz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card.

All key fobs come attached with a metal key ring. Compatible with standard em ID access devices or ID readers, Card read distance: 0-10cm. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - 125khz rfid cardRead Only. Arduino Library. Arduino uno is the most used and documented board in the world. So we can control the quality of our productions by ourselves for you. 125khz rfid em4100 key tag read only and not rewritable, Easy to carry, Water resistant. Each key fob is pre-programmed with a unique digit ID numbers.

Packing in a color box. We have always cared about the customer experience and improve the product function details. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1.

More information about Elegoo EL-CP-004 #ad


Similar products



SunFounder Mifare RC522 Card Read Antenna RF Module RFID Reader IC Card Proximity Module for Arduino

#ad
#ad
SunFounder #ad - This module can be directly loaded into various reader modules. Directly connected with a CPU motherboard, the module can work in a stable and reliable manner as a distance card reader. It utilizes a voltage of 3. 3v, through the SPI interface with simply a few wires. For more information, refer to https://www.

Sunfounder. Com/wiki/index. Php?title=mifare_rc522_module_rfid_reader Specifications Operating current: 13-26mA/DC 3. 3v idle current: 10-13mA/ DC 3. 3v sleep current:. Introduction rfid module the original philips mfrc522 chip design circuit card reader is easy to use and low cost, the reader and the development of advanced applications, and applies to the user equipment development, and the need for the user RF card terminal design/production.

More information about SunFounder #ad


Similar products



Raspberry Pi 3 Model B Motherboard

#ad
#ad
RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad - It has 14 digital input/output pins of which 6 can be used as PWM outputs, a 16 MHz quartz crystal, a power jack, a USB connection, 6 analog inputs, an ICSP header and a reset button. Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. All key fobs come attached with a metal key ring. Compatible with standard em ID access devices or ID readers, Card read distance: 0-10cm.

Raspberry Pi 3 Model B Motherboard #ad - This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity.

125khz rfid cardRead Only. 125khz rfid em4100 key tag read only and not rewritable, Easy to carry, Water resistant. Each key fob is pre-programmed with a unique digit ID numbers. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad


Similar products